Dell PowerEdge 6800 Manuale di risoluzione dei problemi - Pagina 10
Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Server Dell PowerEdge 6800. Dell PowerEdge 6800 16. Installation and troubleshooting guide (.htm)
Stampa la pagina2 Remove the four metal feet from the system:
Orient the system so that the metal feet hang over the edge of the table as shown in
a
Figure 1-3.
Using a #2 Phillips screwdriver or a 1/4-inch nut driver, remove the screw that secures
b
each metal foot and pull each foot from the chassis. See Figure 1-3.
Repeat this step for the other three metal feet.
Figure 1-3. Removing the Metal Feet
3 Remove the system cover and set it aside (see Figure 1-4):
Loosen the two thumbscrews on the front of the system.
a
Slide the system cover back and grasp the cover at both ends.
b
Carefully lift the cover away from the system and set it aside.
c
10
Tower-to-Rack Conversion Guide
metal feet (4)
hex-head Phillips
screws (4)