Dell PowerEdge 6800 Руководство по устранению неполадок - Страница 10
Просмотреть онлайн или скачать pdf Руководство по устранению неполадок для Сервер Dell PowerEdge 6800. Dell PowerEdge 6800 16 страниц. Installation and troubleshooting guide (.htm)
Печатать страницу2 Remove the four metal feet from the system:
Orient the system so that the metal feet hang over the edge of the table as shown in
a
Figure 1-3.
Using a #2 Phillips screwdriver or a 1/4-inch nut driver, remove the screw that secures
b
each metal foot and pull each foot from the chassis. See Figure 1-3.
Repeat this step for the other three metal feet.
Figure 1-3. Removing the Metal Feet
3 Remove the system cover and set it aside (see Figure 1-4):
Loosen the two thumbscrews on the front of the system.
a
Slide the system cover back and grasp the cover at both ends.
b
Carefully lift the cover away from the system and set it aside.
c
10
Tower-to-Rack Conversion Guide
metal feet (4)
hex-head Phillips
screws (4)