Miele PW 811 Installatieplan - Pagina 30

Blader online of download pdf Installatieplan voor {categorie_naam} Miele PW 811. Miele PW 811 38 pagina's.

Pagina afdrukken

Technical data

Water connection

Models with detergent dispenser drawer (WEK)

Permitted flow pressure
Maximum intake rate
Cold water connection
(on-site external thread according to AS 3688, flat seal)
Optional cold water connection for liquid dispensing
(on site external thread according to AS 3688, flat seal)
Optional cold-hard water connection
(on site external thread according to AS 3688, flat seal)
Hot water connection ≤ 70 °C
(on site external thread according to AS 3688, flat seal)
Inlet hose length
Y-piece connector for cold water (if multiple ¾" cold connections are not available)

Models without detergent dispenser drawer (WEK)

Permitted flow pressure
Maximum intake rate
Cold water connection
(on-site external thread according to AS 3688, flat seal)
Cold water connection for liquid dispensing
(on site external thread according to AS 3688, flat seal)
Optional cold-hard water connection
(on site external thread according to AS 3688, flat seal)
Hot water connection ≤ 70 °C
(on-site external thread according to AS 3688, flat seal)
Inlet hose length
Y-piece connector for cold water (if multiple ¾" cold connections are not available)

Drain valve

Maximum drain water temperature
Waste water connection (on machine)
Drain (on-site)
Maximum drainage rate

Connection for equipotential bonding

Connection with male thread (machine)
Washers and nuts
30
1-10 bar
79.5 l/min
2 x ¾" or 1 x 1"
2 x ¾" or 1 x 1"
1500 mm
2 x ¾" to 1 x 1"
1-10 bar
69.5 l/min
2 x ¾" or 1 x 1"
1500 mm
2 x ¾" to 1 x 1"
Plastic pipe HT DN 70
DN 70 connection
200 l/min
10 mm x 35 mm
PW 811 / PW 814 / PW 818
1 x ¾"
1 x ¾"
1 x ¾"
1 x ¾"
1 x ¾"
95 °C
M 10