Miele PW 811 План установки - Страница 30
Просмотреть онлайн или скачать pdf План установки для Стиральная машина Miele PW 811. Miele PW 811 38 страниц.
Печатать страницуTechnical data
Water connection
Models with detergent dispenser drawer (WEK)
Permitted flow pressure
Maximum intake rate
Cold water connection
(on-site external thread according to AS 3688, flat seal)
Optional cold water connection for liquid dispensing
(on site external thread according to AS 3688, flat seal)
Optional cold-hard water connection
(on site external thread according to AS 3688, flat seal)
Hot water connection ≤ 70 °C
(on site external thread according to AS 3688, flat seal)
Inlet hose length
Y-piece connector for cold water (if multiple ¾" cold connections are not available)
Models without detergent dispenser drawer (WEK)
Permitted flow pressure
Maximum intake rate
Cold water connection
(on-site external thread according to AS 3688, flat seal)
Cold water connection for liquid dispensing
(on site external thread according to AS 3688, flat seal)
Optional cold-hard water connection
(on site external thread according to AS 3688, flat seal)
Hot water connection ≤ 70 °C
(on-site external thread according to AS 3688, flat seal)
Inlet hose length
Y-piece connector for cold water (if multiple ¾" cold connections are not available)
Drain valve
Maximum drain water temperature
Waste water connection (on machine)
Drain (on-site)
Maximum drainage rate
Connection for equipotential bonding
Connection with male thread (machine)
Washers and nuts
30
1-10 bar
79.5 l/min
2 x ¾" or 1 x 1"
2 x ¾" or 1 x 1"
1500 mm
2 x ¾" to 1 x 1"
1-10 bar
69.5 l/min
2 x ¾" or 1 x 1"
1500 mm
2 x ¾" to 1 x 1"
Plastic pipe HT DN 70
DN 70 connection
200 l/min
10 mm x 35 mm
PW 811 / PW 814 / PW 818
1 x ¾"
1 x ¾"
1 x ¾"
1 x ¾"
1 x ¾"
95 °C
M 10