Miele PW 811 Tesisat Planı - Sayfa 30

Yıkayıcı Miele PW 811 için çevrimiçi göz atın veya pdf Tesisat Planı indirin. Miele PW 811 38 sayfaları.

Sayfayı Yazdır

Technical data

Water connection

Models with detergent dispenser drawer (WEK)

Permitted flow pressure
Maximum intake rate
Cold water connection
(on-site external thread according to AS 3688, flat seal)
Optional cold water connection for liquid dispensing
(on site external thread according to AS 3688, flat seal)
Optional cold-hard water connection
(on site external thread according to AS 3688, flat seal)
Hot water connection ≤ 70 °C
(on site external thread according to AS 3688, flat seal)
Inlet hose length
Y-piece connector for cold water (if multiple ¾" cold connections are not available)

Models without detergent dispenser drawer (WEK)

Permitted flow pressure
Maximum intake rate
Cold water connection
(on-site external thread according to AS 3688, flat seal)
Cold water connection for liquid dispensing
(on site external thread according to AS 3688, flat seal)
Optional cold-hard water connection
(on site external thread according to AS 3688, flat seal)
Hot water connection ≤ 70 °C
(on-site external thread according to AS 3688, flat seal)
Inlet hose length
Y-piece connector for cold water (if multiple ¾" cold connections are not available)

Drain valve

Maximum drain water temperature
Waste water connection (on machine)
Drain (on-site)
Maximum drainage rate

Connection for equipotential bonding

Connection with male thread (machine)
Washers and nuts
30
1-10 bar
79.5 l/min
2 x ¾" or 1 x 1"
2 x ¾" or 1 x 1"
1500 mm
2 x ¾" to 1 x 1"
1-10 bar
69.5 l/min
2 x ¾" or 1 x 1"
1500 mm
2 x ¾" to 1 x 1"
Plastic pipe HT DN 70
DN 70 connection
200 l/min
10 mm x 35 mm
PW 811 / PW 814 / PW 818
1 x ¾"
1 x ¾"
1 x ¾"
1 x ¾"
1 x ¾"
95 °C
M 10