AQUAPHOR RO-70S Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AQUAPHOR RO-70S. AQUAPHOR RO-70S 13 pagina's. Drinking water machine

5. INSTALLING RO-70S

ATTENTION! Installation of RO-70S must be performed by specialists authorized to carry out this

type of work.

Handset JG 3/8

Handset JG 1/4

Figure 2

Determine a convenient location of the faucet for clean

water and the RO-70S. Pay attention to the fact that the

supply tubes must pass freely, without loops or kinks (fig. 2).

The RO-70S must be installed on a flat, sturdy surface

(installation on an uneven surface may result in vibration or

noise).

RO-70S should be distanced or isolated from heat

sources (cookers, boilers, hot water pipes, dishwashers or

washing machines, etc.).

Installation of the connection node* (fig. 3)

• Shut off the cold water.

• Open the kitchen faucet to relieve pressure in the water

supply.

• Connect the cold water supply water connection.

• Connect the red JG tube. For this, pull out from under the

plastic bushing stopper-clip, insert the pre-soaked end of

the tube into the sleeve of the union up to the stop to a

depth of approximately 20 mm and reinstall the clip.

• Check the strength of the tube fastening:

* The manufacturer reserves the right to use the connection points and faucet of a similar design. If necessary, contact the

after-sales service.

Handset JG 1/4

with pressed

metal hub

Fig. 5

Direction of water flow

The input tap

is set to the

position Closed

Locking clip

Figure 3

Fig. 4

Cold Water

Pipe water

supply

Fig. 3

Sealing pad

AQUAPHOR RO-70S | Owner's manual

Connection

node