Panasonic WVNW964 - NETWORK CAMERA Installatiehandleiding - Pagina 26

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Panasonic WVNW964 - NETWORK CAMERA. Panasonic WVNW964 - NETWORK CAMERA 32 pagina's. Ip video cameras
Ook voor Panasonic WVNW964 - NETWORK CAMERA: Gebruiksaanwijzing (21 pagina's), Gebruiksaanwijzing (28 pagina's), Brochure (2 pagina's), Referentie (2 pagina's), Referentie (2 pagina's), Specificaties (2 pagina's), Integratie Opmerking (8 pagina's)

Pagina afdrukken

Panasonic WVNW964 - NETWORK CAMERA Installatiehandleiding

Step 1

Start the Panasonic IP setting software.

Step 2

Click the [IP setting] button after selecting the MAC

address/IP address of the camera to be configured.

Note:

When using a DHCP server, the IP address

assigned to the camera can be displayed by click-

ing the [Refresh] button of the IP setting software.

Step 3

Complete each network setup item and click the

[Apply] button.

Note:

When using a DHCP server, it is possible to set

"DNS" to "AUTO".

Important:

• It may take around 30 seconds to completely

upload the settings of the camera after clicking the

[Apply] button. The settings may be invalidated

when the power supply is cut or when the LAN

cable is disconnected before completing the

upload. In this case, perform the settings again.

• When using a firewall (including software), allow

access to all UDP ports.