Panasonic WVNW964 - NETWORK CAMERA Instrukcja instalacji - Strona 26

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WVNW964 - NETWORK CAMERA. Panasonic WVNW964 - NETWORK CAMERA 32 stron. Ip video cameras
Również dla Panasonic WVNW964 - NETWORK CAMERA: Instrukcja obsługi (21 strony), Instrukcja obsługi (28 strony), Broszura (2 strony), Odniesienie (2 strony), Odniesienie (2 strony), Specyfikacje (2 strony), Uwaga dotycząca integracji (8 strony)

Step 1

Start the Panasonic IP setting software.

Step 2

Click the [IP setting] button after selecting the MAC

address/IP address of the camera to be configured.

Note:

When using a DHCP server, the IP address

assigned to the camera can be displayed by click-

ing the [Refresh] button of the IP setting software.

Step 3

Complete each network setup item and click the

[Apply] button.

Note:

When using a DHCP server, it is possible to set

"DNS" to "AUTO".

Important:

• It may take around 30 seconds to completely

upload the settings of the camera after clicking the

[Apply] button. The settings may be invalidated

when the power supply is cut or when the LAN

cable is disconnected before completing the

upload. In this case, perform the settings again.

• When using a firewall (including software), allow

access to all UDP ports.