Panasonic WVNW964 - NETWORK CAMERA 설치 매뉴얼 - 페이지 26
{카테고리_이름} Panasonic WVNW964 - NETWORK CAMERA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVNW964 - NETWORK CAMERA 32 페이지. Ip video cameras
Panasonic WVNW964 - NETWORK CAMERA에 대해서도 마찬가지입니다: 사용 설명서 (21 페이지), 서비스 매뉴얼 (28 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 사양 (2 페이지), 통합 참고 사항 (8 페이지)
페이지 인쇄
Step 1
Start the Panasonic IP setting software.
Step 2
Click the [IP setting] button after selecting the MAC
address/IP address of the camera to be configured.
Note:
When using a DHCP server, the IP address
assigned to the camera can be displayed by click-
ing the [Refresh] button of the IP setting software.
26
Step 3
Complete each network setup item and click the
[Apply] button.
Note:
When using a DHCP server, it is possible to set
"DNS" to "AUTO".
Important:
• It may take around 30 seconds to completely
upload the settings of the camera after clicking the
[Apply] button. The settings may be invalidated
when the power supply is cut or when the LAN
cable is disconnected before completing the
upload. In this case, perform the settings again.
• When using a firewall (including software), allow
access to all UDP ports.