Olympus bx40 Gebruiksaanwijzing - Pagina 18

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus bx40. Olympus bx40 33 pagina's. Replacement illuminator
Ook voor Olympus bx40: Installatie-instructies (4 pagina's)

Pagina afdrukken

Fig. 23

Fig. 24

Fig. 25

1. Slightly loosen the Stage clamping screw 0.

2. The Stage tan be rotated both to the left and to the right by turning it

with the Stage clamping screw.

Sr A click may be heard and felt during rotation.

However,

this is

due to the construction

of the substage and does not indicate a

malfunction.

0 The angle of rotation varies depending on the Position of the Stage knobs.

Specifications are identical for both the Standard type and long

type knobs.

0 By lowering

the Position

of the substage,

the microscope

will

accommodate specimens with maximum heights of 40 mm. This is useful

when observing metallurgical specimens and other thick objects.

1. Lower the Stage to the lower limit, then remove the Stage from the

microscope. (See page 3)

2. Using the Allen screwdriver, loosen the substage bracket clamping screw

0 and remove the substage. (Fig. 24)

3. Turn the coarse adjustment knob and raise the focusing block @ to where

the stopper screw @ in the arm becomes visible. (Fig. 25)

4. Using the Allen screwdriver, loosen and remove the upper stopper screw

5. Reattach substage bracket and Stage.

0 Store the removed stopper screw @ in a safe place so that it will not

be lost, if needed again.