AlphaESS SMILE-G3-S5 Inbedrijfstelling hardware - Pagina 15

Blader online of download pdf Inbedrijfstelling hardware voor {categorie_naam} AlphaESS SMILE-G3-S5. AlphaESS SMILE-G3-S5 18 pagina's.

Commissioning Procedures

1.5.2. Check the PV Generation and Discharging Function of the Product

Step1: Please switch off the PV switch on the energy storage inverter and the AC

breaker on the PV inverter if there is any. Switch on some larger loads to see the

battery discharging status.

Step 2: Please switch on the PV switch on the energy storage inverter and the AC

breaker on the PV inverter if there is any. Check the running status of the system.

1.5.3. Check the UPS State of the Product

 Switch oﬀ the external AC breaker between the grid and the inverter. The inverter

will enter the UPS mode at once.

 Switch on the external AC breaker between the inverter and the backup loads.

 Please connect a low-power electrical appliance to the socket of backup load.

The relative value should be like this:

Load = GRID

Battery

The relative value should be like this:

Load = PV

GRID

Battery

±:

charging: - ; discharging:

PV arrow

should be as the picture shows.

±:

>>absorbing from grid: +;

feed-in to grid:-

If not correct, please check the CT or meter installed

direction on PV side