Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Installatie Opmerking - Pagina 7

Blader online of download pdf Installatie Opmerking voor {categorie_naam} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 14 pagina's. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ook voor Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Oplossingshandleiding (17 pagina's), Installatie Opmerking (46 pagina's), Witboek (19 pagina's), Beschrijving (1 pagina's), Product Bulletin (6 pagina's), Kennisgeving (4 pagina's), Gegevensblad (9 pagina's), Gegevensblad (18 pagina's), Witboek (18 pagina's), Configuratiehandleiding (8 pagina's), Installatie Opmerking (28 pagina's), Handleiding voor probleemoplossing (11 pagina's), Installatie Opmerking (18 pagina's), Gebruikershandleiding (17 pagina's), Installatie Opmerking (24 pagina's), Handmatig (19 pagina's), Installatie Opmerking (36 pagina's)

Pagina afdrukken
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Installatie Opmerking
Table 1
Task
Copy a Flash file to a TFTP server, another
Flash device, or to the running
configuration.
Copy a file from a TFTP server to a Flash
device or to the running configuration.
Copy a file from Flash memory to a TFTP
server or to a Flash device, or to the
running configuration.
Copy the running configuration to another
Flash device or to a TFTP server.
Set the BOOT environment variable.
Format a Flash PC device.
Specify the boot field in the configuration
register, which determines the boot
method the switch will use at the next
startup.
Display the contents of the BOOT
environment variable.
Clear a specific image from the BOOT
environment variable.
Clear the entire BOOT environment
variable.
Display a list of files on a Flash device.
Set the default Flash device for the system. cd [[m/][bootflash: | slot0:]]
Verify the default Flash device for the
system.
Delete a file on a Flash device.
Undelete a file on a Flash device.
Permanently remove all deleted files on a
Flash device.
Identify the supported Flash devices on the
system.
Display information about the Flash PC.
Verify the checksum of a file on a Flash
device.
78-6507-06
Commands for Using and Managing Flash Devices
Command
copy m/device:filename {tftp | flash | m/device:filename |
config}
copy tftp {flash | m/device:filename | config}
copy flash {tftp | m/device:filename | config}
copy config {flash | m/device:filename | tftp}
set boot system flash device:[filename] [prepend]
[mod_num]
format [spare spare-number] [m/]device1: [[device2:]
[monlib-filename]]
set boot config-register boot {rommon | bootflash |
system} [mod_num]
show boot [mod_num]
clear boot system flash device:[filename] [mod_num]
clear boot system all [mod_num]
dir [[m/]device:][filename] [all | deleted | long]
pwd [mod_num]
delete [[m/]device:]filename
undelete index [[m/]device:]
squeeze [m/]device:
show flash devices
show flash [[m/]device:] [all | chips | filesys]
verify [[m/]device:] filename
Catalyst 6500 Series Supervisor Engine Flash PC Card Installation Note
Using Flash PC Cards
7