Cisco 9134 - MDS Multilayer Fabric Switch Configuratiehandleiding - Pagina 42

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 pagina's. Mds 9000 series
Ook voor Cisco 9134 - MDS Multilayer Fabric Switch: Specificaties (3 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (22 pagina's), Release Release (3 pagina's), Release Release (40 pagina's), Release-opmerkingen (10 pagina's), Handmatig (16 pagina's), Hardware installatiehandleiding (36 pagina's)

Cisco 9134 - MDS Multilayer Fabric Switch Configuratiehandleiding
Figure 38 Selecting Load Balance Policy
7.
Repeat steps 3 through 6 for the other target.
8.
On the iSCSI-enabled C-Series Fibre Channel switch in the IP > iSCSI window, click the Session
Initiators tab to verify C-Series iSCSI sessions
Figure 39 Verifying C-Series iSCSI sessions
Configuring p-Class Blade servers in an iSCSI environment
This section describes the procedures to prepare a p-Class Blade server for inclusion in an iSCSI
environment. Each Blade server enclosure has a pair of network interconnects located at the left most and
right most positions in the enclosure. They transmit and receive all Ethernet and Fibre Channel signals
between installed Blade servers. The interconnect modules are based on either the Cisco Gigabit Ethernet
Switch Module (CGESM) or the Gibabit Ethernet 2 (GbE2) standards.
Configuring p-Class Blade CGESM server enclosure interconnects
This section describes a configuration example using CGESM interconnects. For details on the
configuration or installation of the interconnects, see the specific Blade server documentation.
42
(Figure
39).