Cisco 9134 - MDS Multilayer Fabric Switch Yapılandırma Kılavuzu - Sayfa 42

Anahtar Cisco 9134 - MDS Multilayer Fabric Switch için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco 9134 - MDS Multilayer Fabric Switch 49 sayfaları. Mds 9000 series
Ayrıca Cisco 9134 - MDS Multilayer Fabric Switch için: Teknik Özellikler (3 sayfalar), Yayın Notu (48 sayfalar), Yayın Notu (44 sayfalar), Yayın Notu (22 sayfalar), Yayın Notu (3 sayfalar), Yayın Notu (40 sayfalar), Sürüm Notları (10 sayfalar), Manuel (16 sayfalar), Donanım Kurulum Kılavuzu (36 sayfalar)

Sayfayı Yazdır
Cisco 9134 - MDS Multilayer Fabric Switch Yapılandırma Kılavuzu
Figure 38 Selecting Load Balance Policy
7.
Repeat steps 3 through 6 for the other target.
8.
On the iSCSI-enabled C-Series Fibre Channel switch in the IP > iSCSI window, click the Session
Initiators tab to verify C-Series iSCSI sessions
Figure 39 Verifying C-Series iSCSI sessions
Configuring p-Class Blade servers in an iSCSI environment
This section describes the procedures to prepare a p-Class Blade server for inclusion in an iSCSI
environment. Each Blade server enclosure has a pair of network interconnects located at the left most and
right most positions in the enclosure. They transmit and receive all Ethernet and Fibre Channel signals
between installed Blade servers. The interconnect modules are based on either the Cisco Gigabit Ethernet
Switch Module (CGESM) or the Gibabit Ethernet 2 (GbE2) standards.
Configuring p-Class Blade CGESM server enclosure interconnects
This section describes a configuration example using CGESM interconnects. For details on the
configuration or installation of the interconnects, see the specific Blade server documentation.
42
(Figure
39).