Cisco 800 Series Ontwerphandleiding - Pagina 38

Blader online of download pdf Ontwerphandleiding voor {categorie_naam} Cisco 800 Series. Cisco 800 Series 50 pagina's. Fast step software design guide
Ook voor Cisco 800 Series: Release-opmerkingen (36 pagina's), Snelstarthandleiding (13 pagina's), Snelstarthandleiding (17 pagina's), configureren (32 pagina's)

Pagina afdrukken

Web Site Support

The Cisco Fast Step_Reset.exe program launches a Web browser and points to the Registration and

Welcome Web sites of the service provider.

Registration Web Site

The registration Web site launches a local Web page. The path is relative to the Cisco 800 Fast Step

installation directory. A Web browser must be installed, and it is automatically launched as a separate

program. The following is an example of the flag in the CFG file:

[Belle Systems]

ISPSetupURL=http://test.cisco.com

Welcome Web Site

The Welcome Web site displays after the router has been registered and configured through Belle

Systems IMS+. The path is relative to the Cisco 800 Fast Step installation directory. A Web browser

must be installed, and it is automatically launched as a separate program. The following is an example

of the flag in the CFG file:

[Belle Systems]

ISPLocalURL=http://www.cisco.com

Service Provider Instructions to End Users

The procedures in this section describe loading a CFG file and a TPL file for the end user. Although it

is likely that you will modify these instructions for individual use, they provide a starting point.

End-User Instructions for CFG Files

Complete the following procedure to load a router configuration by using a Cisco 800 Fast Step CFG

file:

Cable the router as described in the Cisco 800 Fast Step Quick Reference Guide.

Step 1

Locate the instruction sheet that lists the parameters you will need to configure the router.

Step 2

Install Cisco 800 Fast Step software on a PC attached to the router by a configuration cable or connected

Step 3

to the same Ethernet LAN.

Launch Cisco 800 Fast Step Setup. The Welcome window displays.

Step 4

Click Next. The Service Selection window displays.

Step 5

Cisco 800 Fast Step Software Design Guide

4-6

Chapter 4

Custom Software Installation

OL-10373-02