Cisco ASA 5506W-X Installatiehandleiding - Pagina 44

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco ASA 5506W-X. Cisco ASA 5506W-X 46 pagina's. Threat defense reimage guide
Ook voor Cisco ASA 5506W-X: Snelstarthandleiding (10 pagina's), Configuratiehandleiding (13 pagina's), Snelstarthandleiding (14 pagina's), Eenvoudige installatiehandleiding (11 pagina's), Software Handleiding (37 pagina's), Monteren en aansluiten (12 pagina's), Het chassis monteren (10 pagina's)

Pagina afdrukken
Cisco ASA 5506W-X Installatiehandleiding

Install the Adjustable Power Supply Retainer

Figure 29: DC Power Adapter
1
Black wire (negative)
3
Adapter
Step 2
Plug the adapter cord into the chassis.
The power adapters have 18 AWG wires for the input connection. Tinned bare wires are used for the input
Note
connection because there is no standard established for connector type. Screw terminal blocks are most often
used.
Step 3
Power on the chassis and check that it has power. See
Install the Adjustable Power Supply Retainer
You can install an adjustable power supply retainer for the Delta and LiteOn power supplies in the rack-mount
tray. The bracket kit contains the bracket, 2 M3 screws, and washers. The following figure shows the adjustable
retainer.
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
40
2
White wire (positive)
LEDs, on page 7
for information on the power LED.
Installation, Maintenance, and Upgrade
Online Only