Cisco TelePresenceMCU 5300 Series Aan de slag - Pagina 6
Blader online of download pdf Aan de slag voor {categorie_naam} Cisco TelePresenceMCU 5300 Series. Cisco TelePresenceMCU 5300 Series 20 pagina's. Multipoint control units
Pagina afdrukken
Connecting the MCU
Before you start
IMPORTANT
information at
Step one: Connect power
Connect the power connector on the rear of the unit to the power supply using the
supplied power cable. (There is no On/Off switch.)
Step two: Connect to Ethernet Port A
Connect an Ethernet cable from Ethernet Port A to an Ethernet switch.
Only connect to Ethernet Port B if you need to connect the MCU to a
i
second subnet.
Do not connect Ethernet Port A and Ethernet Port B to the same subnet.
!
Failing to configure both sides of the Ethernet connection in the same
!
way can result in packet loss leading to poor audio and video quality.
: Before installing the MCU, you must read the safety
http://www.cisco.com/go/telepresence/safety
Connecting the MCU
.
6