Cisco UCS B200 M4 Upgrade handleiding - Pagina 3

Blader online of download pdf Upgrade handleiding voor {categorie_naam} Cisco UCS B200 M4. Cisco UCS B200 M4 9 pagina's. For e5-2600 v4 series cpus
Ook voor Cisco UCS B200 M4: Installatie en onderhoud (30 pagina's), Installatie en onderhoud (46 pagina's), Onderhoudshandleiding (24 pagina's)

Pagina afdrukken

Introduction

# show image

# activate firmware <boardcontroller version>.0 force

# commit-buffer

Step 12

Do not continue with the next step until board controller activation completes. Verify that the activation is complete by

using the

show image

successfully.

# show version

Boardcontroller:

Running-Vers: x.0

Package_Vers:

Activate-Status: Ready

Step 13

Use the Cisco UCS Manager GUI to clear the WILL_BOOT_FAULT and reset the server CIMC:

a) In the Navigation pane, click the Equipment tab.

b) On the Equipment tab, expand Equipment > Chassis > Chassis number > Servers, then choose your server.

c) In the Work pane, click the General tab.

d) In the Actions area, click Recover Server.

e) In the Recover Server dialog, click Reset CIMC (Server Controller), then click OK.

Wait for CIMC to reboot and for Cisco UCS Manager to do a shallow discovery of the server. This process takes two

to three minutes. At the end of the process, the WILL_BOOT_FAULT is cleared.

Upgrade Scenario: UCS Manager and the BIOS Software are at the Minimum

Supported Release Version, and the Server has Intel E5-2600 v3 Series CPUs

Before You Begin

This scenario assumes the following conditions:

• The Cisco UCS Manager software is at Release 2.2(4), which is the minimum required version, or a

• The server is running a BIOS/CIMC version that is the minimum required version or a later version.

Upgrade Scenario: UCS Manager and the BIOS Software are at the Minimum Supported Release Version, and the

command to see that Activate-Status returns Ready. This process takes a few minutes to complete

later version.

Cisco UCS B200 M4 Server Upgrade Guide for E5-2600 v4 Series CPUs

Server has Intel E5-2600 v3 Series CPUs