DigiVac SNAP Operationele handleiding - Pagina 5

Blader online of download pdf Operationele handleiding voor {categorie_naam} DigiVac SNAP. DigiVac SNAP 17 pagina's. Vacuum control and pressure regulation in one

Pagina afdrukken

Section 3. Installation

Now, it's time to connect the SNAP Vacuum Controller: The only required connections

for operation are power, a vacuum pump, and a vacuum system.

Hooking the SNAP up to a system is a simple process:

1.Mounting: Find a suitable location for

mounting the SNAP. In its standard,

landscape mode, SNAP sits on rubber feet.

It should be put in a place that easily

allows access to the touch screen, but has

minimal process vibration. A mounting

bracket or pole clamp can be added-on to

allow for direct mounting to certain

vacuum ovens or rotovaps. These options

are best used in SNAP's portrait mode.

2.Connect to Vacuum Pump: Connect your

vacuum pump to the KF25 input labeled

"Vacuum Pump".

3.Connect to Vacuum System: Connect

your vacuum system to the KF25 vacuum

output labeled "System".

4.Vent Port (optional): If you would like to use a gas other than ambient air to vent

your system, connect that vent gas to the hose barb.. Many customers may

choose to vent with dry Nitrogen.

5.Data Capture (optional): Attach USB connection for data to a PC or other system.

6.Analog In/Out (optional): Connect to a PLC and use speciﬁed voltages to control.

7.External Sensor (optional): Connect an external sensor(e.g. 10 Torr Capacitance

Manometer for improved accuracy

8.Power: Plug in to Power and turn on

2021 DigiVac Company®Allrights reserved. | 1020 Campus Drive, Morganville,NJ 07751 | (732) 765-0900