DigiVac SNAP Podręcznik operacyjny - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik operacyjny dla Kontroler DigiVac SNAP. DigiVac SNAP 17 stron. Vacuum control and pressure regulation in one

Drukuj stronę

Section 3. Installation

Now, it's time to connect the SNAP Vacuum Controller: The only required connections

for operation are power, a vacuum pump, and a vacuum system.

Hooking the SNAP up to a system is a simple process:

1.Mounting: Find a suitable location for

mounting the SNAP. In its standard,

landscape mode, SNAP sits on rubber feet.

It should be put in a place that easily

allows access to the touch screen, but has

minimal process vibration. A mounting

bracket or pole clamp can be added-on to

allow for direct mounting to certain

vacuum ovens or rotovaps. These options

are best used in SNAP's portrait mode.

2.Connect to Vacuum Pump: Connect your

vacuum pump to the KF25 input labeled

"Vacuum Pump".

3.Connect to Vacuum System: Connect

your vacuum system to the KF25 vacuum

output labeled "System".

4.Vent Port (optional): If you would like to use a gas other than ambient air to vent

your system, connect that vent gas to the hose barb.. Many customers may

choose to vent with dry Nitrogen.

5.Data Capture (optional): Attach USB connection for data to a PC or other system.

6.Analog In/Out (optional): Connect to a PLC and use speciﬁed voltages to control.

7.External Sensor (optional): Connect an external sensor(e.g. 10 Torr Capacitance

Manometer for improved accuracy

8.Power: Plug in to Power and turn on

2021 DigiVac Company®Allrights reserved. | 1020 Campus Drive, Morganville,NJ 07751 | (732) 765-0900