Epson TM-L90 series Handleiding productie - Pagina 13

Blader online of download pdf Handleiding productie voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 22 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (21 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Handmatig (13 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruikershandleiding (36 pagina's), Ontwikkelingshandboek (34 pagina's), Handmatig (2 pagina's)

Confidential

2. If the transparency rates are out of the specified range (label + backing paper:

18% or less, backing paper: 47% or more), the printer detects a layout error.

However, paper identified with a layout error may be used when the detection hole

is prepared as follows and the position to detect the label may be shifted by

approximately 0.5 mm {0.02"}.

1.75 ± 0.5

6 ± 0.5

Corner R2 or less

3.10 Requirements for Black Mark Position for Die-Cut Label Paper

For die-cut labels with black marks, there are two reflective rate requirements, depending on the

size and position of black marks. Be sure to use label paper that meets either black mark

position requirement I or II as follows:

0.5 ± 0.3

Corner R0.5

(4)

or less

8.0 ± 0.1

0.5 ± 0.3

TITLE

TM-L90

Roll Paper

Manufacturing Guide

5.0 ± 0.5

Face (printed side)

SHEET

REVISION

Detection hole

[Units: mm]

NO.

SHEET