Epson PowerLite 1825 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson PowerLite 1825. Epson PowerLite 1825 14 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson PowerLite 1825: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Snelle installatie (2 pagina's), Bedieningshandleiding (47 pagina's), Conformiteitsverklaring (4 pagina's), Productspecificatie (2 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Pagina afdrukken

PowerLite 1825

Hold down the

button on the remote control and use the

Num

numeric keypad to enter the four-digit password. The password

screen closes and projection begins.

If the password is not correct, you see a message prompting you

to re-enter it. If you enter an incorrect password three times in

succession, you see the message

and the projector switches to standby mode.

be locked

Disconnect the projector's power cord from the electrical outlet,

reconnect it, and turn the projector back on.

When you see the Password screen again, you can try to enter

the correct password.

If you enter an incorrect password 30 times in succession, the

projector remains locked and you must contact Epson to unlock

it. If you have forgotten the password, contact Epson with the

request code number that appears in the Password screen for

assistance.

Note: If you leave the projector plugged in, the Password Protect

Release screen will not appear. It appears only if you unplug and

reconnect the power cable.

Disabling the Projector's Buttons

When you enable the Operation Lock function, you can lock all

the projector's buttons, or all buttons except the P

button. The remote control can still be used to operate the

projector.

1. Press the

button, highlight the

press

Enter

2. Select

Operation Lock

3. Select

(to lock all projector buttons) or

Full Lock

(to lock all buttons except the

Lock

press

Enter

4. Select

and press

Yes

Enter

5. Press the

button to exit.

To disable the Operation Lock function, select

Operation Lock menu. Or press and hold the

the projector's control panel for 7 seconds. A message is

displayed and the lock is released.

Hold down

The projector's operation will

Power

menu, and

Settings

and press

Enter

Partial

button) and

Power

to confirm the setting.

in the

Off

button on

Enter

Checking Projector Status

If your projector isn't working correctly, first turn it off, wait for

it to cool (the

Power

Then plug the power cord back in and turn on the projector. If

this doesn't solve the problem, check the lights on top of the

projector.

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status.

Power light

Lamp light

The following table describes the projector's status lights.

Status lights

Light

Status

Orange

Flashing

green

Green

Flashing

orange

Red

Flashing

orange

2/08

light stops flashing orange), and unplug it.

Temperature light

Description

The projector is in sleep or standby mode.

You can unplug it or press the

button to turn it on.

The projector is warming up. Wait for the

image to appear.

The projector is operating normally.

The projector is cooling down. You can't

turn it back on until the light stops flashing

and remains orange.

There is a problem with the projector.

Check the other two lights and the

information on this page to diagnose the

problem.

Rapid cooling is in progress. Although this

is not an abnormal condition, projection

will stop automatically if the temperature

rises higher. Make sure there is plenty of

space around and under the projector for

ventilation, and that the air filters and

vents are clear.

Power