Clark Synthesis TACTILE SOUND AQ339 Aquasonic Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Clark Synthesis TACTILE SOUND AQ339 Aquasonic. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 20 pagina's. Underwater speaker
Ook voor Clark Synthesis TACTILE SOUND AQ339 Aquasonic: Aanvullende handleiding (4 pagina's), Specificaties (1 pagina's), Onderdelenlijst (1 pagina's), Gebruikershandleiding (1 pagina's), Referentieblad (1 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (3 pagina's), Specificatie (1 pagina's)

IN-WALL INSTALLATION

NOTE: The Face Ring Kit, Stainless Steel Screen, Niche and Isolation Transformer are not included and

may be purchased from Clark Synthesis.

Carefully remove the speaker from its box and set aside. Remove the black o-ring from inside the

red gasket and dispose.

Install the mounting gasket around the rubber ring of the sound lens. The gasket's flat side will

go towards the face ring. The grooved side faces the speaker body. Insure the mounting gasket is

installed evenly and is firmly seated against the entire circumference of the sound lens.

Grooved Side

Flat side

Diluvio

Underwater Speaker

™