CTM LYNG microsafe mKomfy 1.8 16R Installatie-instructies Gebruikersinstructies - Pagina 3
Blader online of download pdf Installatie-instructies Gebruikersinstructies voor {categorie_naam} CTM LYNG microsafe mKomfy 1.8 16R. CTM LYNG microsafe mKomfy 1.8 16R 12 pagina's.
Pagina afdrukken
Safety functions
mKomfy 1.8 has been developed for use in private homes. In order to
avoid too many false alarms, the cooker guard spends a short amount
of time analysing the information from the cooker hob. Cooker hobs
which are so powerful that they are able to start a fire in under 120
seconds work so quickly that the cooker guard may find it hard to
react before a fire is ignited, depending on the cookware and the
substances in it on the cooker hob.
Overheating
The Cooker Guard monitors the temperature of the cooker and sounds the
alarm if it exceeds the upper limit.
The temperature alarm beeps 3 times every 5 seconds for 20 seconds and
a red light comes on in the sensor. Reduce the temperature of the cooker
immediately to prevent it being turned off, or press the control button on
the sensor to approve the higher temperature for a set time.
Anti-tamper function
The cooker guard has an integral safety function which detects if the
sensor is not correctly mounted in the fixing bracket. If the cooker is in
use and the sensor is incorrectly mounted, the security function will be
activated and beep 5 times in 5 seconds before turning the cooker off.
Replace the sensor in the wall bracket and press the control button to
continue using the cooker.
Optional timer function (see page 10 for activation)
When the Cooker Guard detects that the cooker has been turned on, it can
start a built-in timer (countdown clock). When the timer reaches zero,
the cooker is turned off. The Cooker Guard will alert the user for the last 5
minutes. To restart the timer, press the control button on the sensor once.
To extend cooking time, hold the control button in for 10 seconds (see page
4).
NB: Where current measurement is used, the timer will start up when
power consumption is detected. If there is no power consumption for over
1 minute, the timer will revert to zero.
For example, when using the oven, the oven thermostat can disconnect
the power for over 1 minute, thus resetting the timer.
Use of current measurement (DIP 9)
When current measurement is used, the cooker guard safety function will
only be activated when power consumption by the cooker hob is detected.
The standard consumption here is approx. 280W. If the cooker consumes
less than 280W during use, the safety function will not be activated. This
limit can be tested and calibrated, see page 11.
3