3D Systems CUBE Les - Pagina 11

Blader online of download pdf Les voor {categorie_naam} 3D Systems CUBE. 3D Systems CUBE 15 pagina's. Replacing the print tip
Ook voor 3D Systems CUBE: Documentatie (8 pagina's), Gebruikershandleiding (20 pagina's)

Pagina afdrukken

If you have a DUO or TRIO follow the steps below.



Level the print tips (refer to "leveling and Z-gap settings"

lesson)



Set the print jet offsets (refer to "setting the print jet offsets"

lesson).

Note:



If you have a single head machine please continue.

Next Steps

Those sections will cover the following section.