3D Systems CUBE Les - Pagina 12

Blader online of download pdf Les voor {categorie_naam} 3D Systems CUBE. 3D Systems CUBE 15 pagina's. Replacing the print tip
Ook voor 3D Systems CUBE: Documentatie (8 pagina's), Gebruikershandleiding (20 pagina's)

Pagina afdrukken
3D Systems CUBE Les
Fastening the Print Tip on a Cube X
A CubeX with a single print jet does not have a second or third nozzle to
reference the print tip level. Instead you have to use the CubeX wiping stick.
1. Power on the CubeX printer
2. Put the CubeX into manual move.
12