BlueSky Mast AL3 Series Snelle referentieblad - Pagina 2

Blader online of download pdf Snelle referentieblad voor {categorie_naam} BlueSky Mast AL3 Series. BlueSky Mast AL3 Series 6 pagina's.
Ook voor BlueSky Mast AL3 Series: Snelle referentieblad (6 pagina's)

Pagina afdrukken
AL3 Lift Series - Deployment Quick Reference Sheet
21
Locate the
RED TIPPED strut
base plate stake
and hammer
it into the strut base plate.
26
Attach the red clip from the
primary guy rope to the round
hole on the guy ring.
31
Make sure the cam lock is
locked and lower the lift base
plate to the ground.
36
Lock the cam lock on the Blue
Secondary Guy Ring.
Do Not Duplicate, Alter, or Copy without the Express Written Consent
of BlueSky Mast, Inc. Copyright 2013 Allendale LLC All Rights Reserved
22
Confirm the cable is taut and
the lift base plate is secure.
27
Unwind the guy rope and take
one normal step per meter of
height. 15 Meters = 15 Steps
32
Insert a center mast pole onto
the tapered cone on the lift base
plate.
37
Attach the blue clip from the
secondary guy rope to the
round hole on the guy ring.
23
Release the cam lock on the
tripod and raise the mounting
pole by turning the winch.
28
Unwind the remaining guy rope
and drive 2 stakes through the
dual stake plates.
33
Raise the center mast pole until
it nest together into the bottom
of the mounting pole.
38
Walk away from the mast and
unwind all the guy rope. DO
NOT stake it at this time.
Read Manual Before Use
Refer to detailed instructions in the
AL3 Lift Series Manual at all times
24
1"
Leave 1 inch below the cam
lock and lock the cam lock.
29
Slide the handle towards the
mast approx 7 feet and drop on
the ground.
34
1"
Release the cam lock and raise
until 1 inch is showing below the
tripod. Lock the cam lock.
39
Repeat this process until all
secondary guy ropes are de-
ployed. DO NOT stake them.
25
Pin the
Red Primary Guy Ring
to the Mounting Pole below your
devices.
30
Continue this process until all 4
primary guy ropes have been
deployed 90 degrees apart.
35
Continue this process until you
have reached 1/2 the total mast
height.
40
Raise the mast until the primary
guy ropes go taut. Incremental
guying may be required.