BlueSky Mast AL3 Series Snelle referentieblad - Pagina 4
Blader online of download pdf Snelle referentieblad voor {categorie_naam} BlueSky Mast AL3 Series. BlueSky Mast AL3 Series 6 pagina's.
Ook voor BlueSky Mast AL3 Series: Snelle referentieblad (6 pagina's)
Pagina afdrukkenAL3 Lift Series - Deployment Quick Reference Sheet
AL3 Lift Series - Lowering Quick Reference Sheet
1
Replace the winch handle if it
was removed after deployment.
6
Lower the base pole and lift
base plate to the ground &
remove the base pole.
11
Repeat process 7, 8, 9 and 10
until the secondary guy ring is
within reach.
16
Remove the red tipped strut
base plate stake and stow the
strut base plate.
Do Not Duplicate, Alter, or Copy without the Express Written Consent
of BlueSky Mast, Inc. Copyright 2013 Allendale LLC All Rights Reserved
2
Replace the Lift Base Plate and
run the cable through
and
secure it in the holder.
7
Raise the lift base plate until it
inserts into the pole. Release
the cam lock.
12
Release the cam lock on the
secondary guy ring & remove
the guy ropes.
17
Remove both stakes from the
tilt leg and the left stakes from
the other legs.
3
Remove the stakes from the Lift
Base Plate by using the stake
puller.
8
Lower the mast until 2 inches of
the next pole is visible below
the cam lock.
13
Repeat process 7, 8, 9, and 10
until the primary guy ring is
within reach.
18
Loosen the turn knob on the tilt
leg and kneel the tripod.
Read Manual Before Use
Refer to detailed instructions in the
AL3 Lift Series Manual at all times
4
Unlock the ALL guy ropes and
slide the guy handles toward
the stakes 12 inches.
9
Lock the cam lock.
14
Remove the primary guy ropes
and wind all ropes onto their
handles.
19
Remove all equipment and
accessories.
5
Release the cam lock, raise the
base pole up 12 inches and lock
the cam lock.
10
Remove the pole & place it in
Hard Case #2.
15
Remove the tripod leg struts
from the strut base plate and
secure the struts to the legs.
20
Remove the primary guy ring.