Akw M11 DigiPump Instrukcja instalacji i obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Produkt hydrauliczny Akw M11 DigiPump. Akw M11 DigiPump 20 stron.

Mechanical And Plumbing Installation

Positioning

The AKW M11 DigiPump shower waste water pump must be installed by a

suitably qualified, competent person eg. NIC EIC, in accordance with current IEE

Wiring Regulations (BS7671), building regulations and local by-laws.

This product is rated at IP45 and suitable to be installed in Zone 1 or Zone 2

of a shower room only if these instructions are fully complied with.

The unit must be located away from the direct line of water jets.

Note: Zone 1 lies above zone 0 and below 2250mm (88in) vertically above a shower

tray or wet floor area.

The perimeter of zone 1 of a wet floor is within a 1.2 metres (47in) radius of the

shower head position. Consult BS7671 for further clarification.

FOR GUIDANCE ONLY- PLEASE REFER TO BS7671 FOR FURTHER DETAILS