Canon XL 1 Podręcznik użytkownika - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera Canon XL 1. Canon XL 1 26 stron. Camcorder
Również dla Canon XL 1: Broszura (8 strony), Specyfikacje (1 strony), Instrukcje (2 strony), Broszura i specyfikacje (8 strony), Podręcznik użytkownika (9 strony), Podręcznik (9 strony)

3. To set the input for Stereo 2:

Connect a device to the AUDIO 2 RCA jacks on the handle.

Camera Menu, select Audio 2 INPUT, then select the appropriate option for

AUDIO 2 IN:

a. LINE: To record sound from a VCR, CD or other line-in devices

b. MIC ATT20: To record high-level sound using a microphone

c. MIC: To record sound using a XLR microphone attached to the MA-

100 Microphone Adapter/Shoulder Pad.

4. Select the recording level for 4 channel recording.

Normally, the camera sets the audio recording level automatically, as long as

the REC LEVEL switch is set to A (automatic). You can set the recording

level manually:

a. Set the recording level for Stereo 1:

Slide the REC LEVEL switch of the AUDIO 1/MIC controls to M.

Turn the LEVEL dial to adjust the recording level and BALANCE dial

to adjust the balance between the two inputs. Check the levels in the

audio LCD panel.

b. Set the recording level for Stereo 2:

Slide the REC LEVEL switch of the AUDIO 2 controls to M (manual).

c. Turn the L and R dials to independently adjust the recording levels of

the two inputs (corresponding to the L and R channels of the Audio 2

RCA jacks).

Check the levels for each channel in the audio LCD panel. It is

essential for you to monitor the sound using headphones. Adjust the

headphone volume by rotating the PHONES LEVEL dial.

Making a Sound Check while recording 4 channel audio:

Press the AUDIO MONITOR button to make a sound check — Stereo 1 only (ST1),

Stereo 2 only (ST2) or both (MIX), each in turn.

•

Your choice is selected a few seconds after you last pressed the button, and

shown in the viewfinder and audio LCD panel.

From the