flyingwings Hornet Mini FPV Racer Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Zabawka flyingwings Hornet Mini FPV Racer. flyingwings Hornet Mini FPV Racer 10 stron.

STEP

Hinging elevon,

Method , UHU Por hinge. Run a small bead of glue along the rear top edge of

thetrailing edge of the wing and the same on the leading edge (LE) of the elevon.

Allow glue to set for 5 minutes. On a flat surface bring the two edges together, the

glue fuses together giving a strong flexible hinge, magic.

STEP

Installation of servo adaptors:

Open up the top hole on each ply horn so that the threaded part of

the metal servo adaptors are snug but can turn in the horn. Put the

washer and nut on (not easy when you have fingers like sausages

!). Tighten the nut so the adaptor is firm but can still turn. A blob of

CA glue on the end of the nut will stop it from coming loose.

washer

blob of CA

Glue

nut