Ampro ReadyPanel 6.5 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt komputerowy Ampro ReadyPanel 6.5. Ampro ReadyPanel 6.5 20 stron.
Drukuj stronęChapter 1
Installing Mounting Hardware
6) Install the appropriate
mounting hardware.
Touch Screen
Air Vents
(Front)
Enclosure
Cover
75mm (2.95")
NOTE
The Mounting holes in the bottom of the ReadyPanel conform to the FDMI (Flat
Display Mounting Interface) standard for monitor mounting.
Locating the I/O Connectors
7) Locate the I/O
connectors on the front
of the ReadyPanel.
4
•
Install the mounting hardware for surface or wall mounting to the bottom
of the ReadyPanel. See Figure 1-2.
Note: Make sure the mounting plate clears the fan intake and
provides enough height to allow for unrestricted air flow.
Make sure not to drive the ends of the screws further than
two screw threads past the ends of the PEM nuts located on
the inside of the enclosure cover.
Figure 1-2. Angle View of Enclosure with Mounting Hardware
Refer to
Figure 1-3
connectors and controls before making connections or powering on the
ReadyPanel.
User's Guide
and
Table 1-2
for locations and descriptions of the
ReadyPanel Setup
Air Vents
(Rear)
Cooling Fan
(Bottom)
Suggested
Mounting Plate
ReadyPanel