Ancor 703023 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Ancor 703023. Ancor 703023 12 stron. 120v two setting heat gun

OPERATOR'S MANUAL: 120V TWO SETTING HEAT GUN

WARNING

To reduce the risk of injury, user must read and understand this

operator's manual before operating this tool. Save this Manual

for future reference.

WARNING

The Operation of any power tool can result in foreign objects

being thrown into your eyes, which can result in severe eye

damage. Before beginning tool operation always wear safety

goggles or safety glasses with side shields and a full face shield

when needed. We recommend Wide Vision Safety Mask for use

over eyeglasses or standard safety glasses with side shields.

Always wear eye protection which is marked to comply with

ANSI Z87.1.

GENERAL SAFETY RULES

WARNING

Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area, and work with

approved safety equipment, such as those dust masks that are

specially designed to filter out microscopic particles

WARNING

READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND

OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious personal injury.

ancorproducts.com | 800.307.6702