Ancor 703023 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Ancor 703023. Ancor 703023 12 stron. 120v two setting heat gun

WORK AREA SAFETY

• Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases, or dust. Power tools create sparks which may ignite the

dust or fumes.

• Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control.

• Power tool plugs must match the outlet. Never modify the plug in anyway. Do not

use any adapter plugs in any earthed (grounded) power tools. Double insulated

tools are equipped with a polarized plug (one blade is wider than the other). This

plug will fit in a polarized outlet only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a

polarized outlet. Do not change the plug in any way. Double insulation eliminates the

need for the three wire grounded power cord and grounded power supply system.

• Do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electric shock.

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

grounded.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damage

cords increase the risk of electric shock.

• When operating a power tool outside, use an extension cord suitable for outdoor

use. These cords are rated for outdoor use and reduce the risk of electric shock.

• Do not use AC only rated tools with a DC power supply. While the tool may appear

to work, the electrical components of the AC rated tool are likely to fail and rate a

hazard to the operator.

• Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use tool while tired or under the influence of drugs, alcohol,

or medication. A moment of inattention while operating power tools may result in

serious personal injury.

• Use safety equipment. Always wear eye protection. Safety equipment such as

dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate

conditions will reduce personal injuries.

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in

moving parts. Air vents may cover moving parts and should be avoided.

OPERATOR'S MANUAL: 120V TWO SETTING HEAT GUN

ancorproducts.com | 800.307.6702