CARNES VCDD330I Instrukcja obsługi

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator CARNES VCDD330I. CARNES VCDD330I 4 stron. Inline cabinet fan

Drukuj stronę
Carnes VCDD210I-330I Inline Cabinet Fan
Carnes VCDD210I-330I Inline Cabinet Fan
Operation & Instructions Manual
Operation & Instructions Manual
IN-LINE CABINET
IN-LINE CABINET
VENTILATORS
VENTILATORS
READ AND SAVE THESE INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR IN-
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR IN-
JURY TO PERSONS, OBSERVE THE FOLLOWING:
JURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If
1. Use this unit only in the manner intended by the manufacturer. If
you have questions, contact the manufacturer at the address or
you have questions, contact the manufacturer at the address or
telephone number listed in the warranty.
telephone number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service panel
2. Before servicing or cleaning unit, switch power off at service panel
and lock the service disconnecting means to prevent power from
and lock the service disconnecting means to prevent power from
being switched on accidentally. When the service disconnecting
being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning
means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
device, such as a tag, to the service panel.
3. Installation work and electrical wiring must be done by a quali-
3. Installation work and electrical wiring must be done by a quali-
fied person(s) in accordance with all applicable codes and stan-
fied person(s) in accordance with all applicable codes and stan-
dards, including fire-rated construction codes and standards.
dards, including fire-rated construction codes and standards.
4. Sufficient air is needed for proper combustion and exhausting of
4. Sufficient air is needed for proper combustion and exhausting of
gases through the flue (chimney) of fuel burning equipment to
gases through the flue (chimney) of fuel burning equipment to
prevent backdrafting. Follow the heating equipment
prevent backdrafting. Follow the heating equipment
manufacturer's guideline and safety standards such as those
manufacturer's guideline and safety standards such as those
published by the National Fire Protection Association (NFPA),
published by the National Fire Protection Association (NFPA),
and the American Society for Heating, Refrigeration and Air Con-
and the American Society for Heating, Refrigeration and Air Con-
ditioning Engineers (ASHRAE), and the local code authorities.
ditioning Engineers (ASHRAE), and the local code authorities.
5. When cutting or drilling into wall or ceiling, do not damage elec-
5. When cutting or drilling into wall or ceiling, do not damage elec-
trical wiring and other hidden utilities.
trical wiring and other hidden utilities.
6. Ducted fans must always be vented to the outdoors.
6. Ducted fans must always be vented to the outdoors.
7. This unit must be grounded.
7. This unit must be grounded.
!
CAUTION
!
CAUTION
1. For general ventilating use only. Do not use to exhaust hazard-
1. For general ventilating use only. Do not use to exhaust hazard-
ous or explosive materials and vapors.
ous or explosive materials and vapors.
2. To avoid motor bearing damage and noisy and/or unbalanced
2. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off power
impellers, keep drywall spray, construction dust, etc. off power
unit.
unit.
3. Please read specification label on product for further informa-
3. Please read specification label on product for further informa-
tion and requirements.
tion and requirements.
#2 Chootoo Road, South Aranguez, San Juan, Trinidad
MODELS • VCDD210I • VCDD330I
MODELS • VCDD210I • VCDD330I
®
®
PLAN INSTALLATION
PLAN INSTALLATION
MOUNTING (Right-angle Discharge)
MOUNTING (Right-angle Discharge)
3/8" MIN.
3/8" MIN.
THREADED ROD
THREADED ROD
(By Others)
(By Others)
ACCESS
ACCESS
PANEL
PANEL
DUCT
DUCT
INTAKE
FLANGES
INTAKE
FLANGES
Factory shipped ready to be installed as a ceiling
Factory shipped ready to be installed as a ceiling
ventilator with right-angle discharge.
ventilator with right-angle discharge.
MOUNTING (In-line Configuration)
MOUNTING (In-line Configuration)
ADJUSTABLE
ADJUSTABLE
BRACKET
BRACKET
3/8" MIN.
3/8" MIN.
THREADED ROD
THREADED ROD
(By Others)
(By Others)
INTAKE
INTAKE
DUCT
DUCT
FLANGES
FLANGES
Converted for in-line applications.
Converted for in-line applications.
Page 1
Page 1
MOUNTING
MOUNTING
CHANNELS
CHANNELS
EXHAUST
EXHAUST
CEILING
CEILING
GRILLE KIT
GRILLE KIT
INTAKE
INTAKE
EXHAUST
EXHAUST
ACCESS
ACCESS
PANEL
PANEL