CARNES VCDD330I Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator CARNES VCDD330I. CARNES VCDD330I 4 stron. Inline cabinet fan

Drukuj stronę
Carnes VCDD210I-330I Inline Cabinet Fan
Carnes VCDD210I-330I Inline Cabinet Fan
Operation & Instructions Manual
Operation & Instructions Manual
PLAN INSTALLATION (cont.)
PLAN INSTALLATION (cont.)
CONVERTING FROM RIGHT-ANGLE TO IN-LINE
CONVERTING FROM RIGHT-ANGLE TO IN-LINE
ACCESS
ACCESS
PANEL
PANEL
EXHAUST
EXHAUST
DUCT FLANGE
DUCT FLANGE
EXHAUST
EXHAUST
DUCT FLANGE
DUCT FLANGE
INTAKE DUCT
INTAKE DUCT
FLANGES
FLANGES
Remove and reverse duct flanges and access panel
Remove and reverse duct flanges and access panel
positions on housing.
positions on housing.
For correct intake and exhaust duct size, see Table 1.
For correct intake and exhaust duct size, see Table 1.
TABLE 1
TABLE 1
MODEL
INTAKE DUCT SIZE
MODEL
INTAKE DUCT SIZE
VCDD210I
12-3/8" x 35-3/4"
VCDD210I
12-3/8" x 35-3/4"
VCDD330I
14-1/2" x 43-1/2"
VCDD330I
14-1/2" x 43-1/2"
MOUNTING OPTIONS
MOUNTING OPTIONS
Provide solid support to minimize sound leves. There are two basic
Provide solid support to minimize sound leves. There are two basic
mounting methods for these units.
mounting methods for these units.
3/8" MIN. THREADED RODS
3/8" MIN. THREADED RODS
(By Others)
(By Others)
DIM. VCDD210I VCDD330I
DIM. VCDD210I VCDD330I
A
A
B
B
Typical mounting with threaded rod through
Typical mounting with threaded rod through
mounting channels on top of housing.
mounting channels on top of housing.
#2 Chootoo Road, South Aranguez, San Juan, Trinidad
®
®
MOUNTING OPTIONS
MOUNTING OPTIONS
EXHAUST DUCT SIZE
EXHAUST DUCT SIZE
7-3/4" x 33-3/4"
7-3/4" x 33-3/4"
9-3/4" x 41-3/8"
9-3/4" x 41-3/8"
Mounting with threaded rod through adjustable
Mounting with threaded rod through adjustable
Mounting brackets can be bolted to housing ends in a variety of
Mounting brackets can be bolted to housing ends in a variety of
configurations. Use screws and nuts provided in parts bag.
configurations. Use screws and nuts provided in parts bag.
7-3/4"
10-1/4"
7-3/4"
10-1/4"
33-3/4"
41-3/4"
33-3/4"
41-3/4"
Mounting with threaded rods through adjustable
Mounting with threaded rods through adjustable
If installing unit as a ceiling ventilator, make sure that either duct
If installing unit as a ceiling ventilator, make sure that either duct
flanges or housing will be flush with finished ceiling. Duct flanges
flanges or housing will be flush with finished ceiling. Duct flanges
may be removed and discarded if they interfere with a ceiling instal-
may be removed and discarded if they interfere with a ceiling instal-
lation.
lation.
MODELS • VCDD210I • VCDD330I
MODELS • VCDD210I • VCDD330I
DIM. VCDD210I VCDD330I
DIM. VCDD210I VCDD330I
C
12-5/8"
C
12-5/8"
D
39-5/8"
D
39-5/8"
THREADED RODS
THREADED RODS
mounting brackets located at top of housing.
mounting brackets located at top of housing.
mounting brackets located at bottom of housing.
mounting brackets located at bottom of housing.
Page 2
Page 2
12-5/8"
12-5/8"
47-3/8"
47-3/8"
3/8" MIN.
3/8" MIN.
(By Others)
(By Others)