Zone Bypassing
The zone byp assing function is use d when a c c ess is ne e d e d to p art of the prote cte d are a while the
system is arme d. Zones which are temporarily out of servic e due to d ama g e d wiring or conta cts may
b e byp asse d to allow system arming until re p airs c an b e ma d e.
Byp asse d zones will not c ause an alarm. Zones c annot b e byp asse d onc e the system is arme d.
Byp asse d zones are automatic ally c anc elle d e a ch time the system is disarme d and must b e re a p plie d
b efore the next arming.
NOTE: For security reasons, your installer may program the system to prevent you from
bypassing certain zones.
Bypassing zones reduces your security protection. If you are bypassing a zone due to damaged
wiring or contacts, please call a service technician immediately so that the problem can be
resolved and your system returned to proper working order.
Do not unintentionally bypass zones when you arm your system.
To bypass zones from an LED keypad:
Start with the system in the Re a dy state. Enter [
Enter the zone numb er(s) as a double digit from 01 to 32. As e a ch zone is byp asse d, the corresponding
zone light will turn O N. If a zone is byp asse d by mistake, press that zone numb er a g ain and the zone
light will turn O F F, indic ating that the zone is not byp asse d. Press [#] to return to the Re a dy state.
When the system is arme d, the Byp ass light will b e O N if one or more zones are byp asse d.
To bypass zones from an LCD keypad:
To byp ass a zone, the system must b e in the Re a dy state. The display will re a d...
Press the [
Enter Code to
Arm System
Press the [
Press (*) for< >
Zone Bypass
Use the arrow (< >) keys to find the zone to b e byp asse d and press the [
Zone Search
<>
sele ct it. The display will re a d...
"Zone Name"
"B" will a p p e ar on the display to show that the zone is byp asse d. To unbyp ass a
Zone Search
<>
zone, enter the zone numb er; the "B" will disa p p e ar from the display to show that
"Zone Name"
B
the zone is no long er byp asse d.
This display will b e shown if a zone was op en when you entere d the byp assing
Zone Search < >
command. The op en zone will b e re presente d by " O ". If you byp ass the op en zone,
"Zone Name"
O
the " O " will b e re pla c e d by a "B".
To exit the byp assing mod e and return to the Re a dy state, press the [#] key.
][1][Zone numb er(s) to b e byp asse d].
✱
] key to enter the functions menu. The display will re a d...
✱
] key to enter the zone byp assing mod e. The display will re a d...
✱
] key to
✱
11
Drukuj stronę