cayke back2backDESK Instrukcja instalacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz cayke back2backDESK. cayke back2backDESK 20 stron.

OPERATION

INFORMATION

INITIALIZATION/RESET

The desk must be initialized/reset after any of the following:

- After assembly

- After disconnection from the power supply

- After any impact on the table top.

To initialize/reset, move the table to the lowest position by pressing the DOWN button on the handswitch until

the columns reach the lowest position. Press the DOWN button again until the table moves slightly down to

the machine zero point and back up to the operation zero point. Release the DOWN button. If the button is

released too soon, the table legs will not move up. Repeat the reset process.

The control box is programmed with a parameter file which controls the table legs' lower and upper travel

limits. Under no circumstance should a control box from one table be moved to another.

NORMAL HANDSWITCH OPERATION

By pressing the UP or DOWN buttons, the table will move up or down to the desired position. Once the

desired position is reached, let go of the UP or DOWN button. The table legs will stop once they reach

the lower or upper height limits.

This programmable handswitch is

equipped with a display for showing

the current table height in centimeters

or inches.

The handswitch also will display an error code if an error is detected by the control box. When an error

is detected, the display will show an error code "EXX," instead of the current table height. To resolve the

error, see the Troubleshooting Section (p. 17-18 of this guide).

The programmable handswitch also has the ability to save up to four different height positions.

(for all handswitch types)

(NOT STANDARD)

OPERATION INFORMATION

| 15