HIBLOW HP Series Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Pompa wodna HIBLOW HP Series. HIBLOW HP Series 9 stron.
Również dla HIBLOW HP Series: Podręcznik (5 strony), Podręcznik (8 strony), Skrócona instrukcja obsługi (7 strony)

Drukuj stronę

HP- 100 / 120

STEP

FITTING THE CHAMBER BLOCKS

Fit the actuating rod by aligning it with the groove

and tighten U-lock nut and flat washer by the nut

driver.

●Use new U-lock nut and washer, otherwise, U-lock nut

may work loose and cause malfunction.

STEP

Insert the actuating rod into the machine body. Be

sure to fit the positioning boss on the diaphragm

base into the concave part of the frame stay.

Secure the diaphragm mounting block on the

other side and tighten washers and U-lock nuts

with the nut driver.

Make sure that gap between the actuating rod

and the electromagnets is even.

STEP

Mount the casing block with screws (4 screws on

each side).

And insert L-tube into the nozzle of casing A.

Then, fix it with hose clip.

Complete the other casing block in the same way.

STEP

REPLACEMENT OF SAFETY PIN

Check that the broken pin is removed from unit.

●If the broken pin is left inside the unit, it can get caught

in between electromagnets and actuating rod, which

can cause breakdown.

REPLACING THE CHAMBER BLOCK