DYNANAV Dynaflow 2 Instrukcja instalacji i obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Systemy kontroli DYNANAV Dynaflow 2. DYNANAV Dynaflow 2 15 stron.
Drukuj stronęDynaFlow Pilot Display
Overview
All settings for the system is done on the DynaFlow HMI Touchscreen.
Action Buttons and Display Icons
1. GPS indicator - Displays the state of the GNSS signal.
2. Speed – Displays the Ground Speed of the Aircraft
3. Flow Gauge - Indicates the target flow, measured flow and the error percentage.
4. Spray Time - Gives the total time when spraying is on.
5. Time – Displays the local time as per settings for time.
6. Stopwatch – Resets the Spray Time to zero
7. Change Target Rate - Button that allows the pilot to set the target rate.
730 – 11731 BAYNES ROAD, PITT MEADOWS, BC, CANADA, V3Y 2B4
WEB PAGE:
www.dynanav.com
SIMPLE BY DESIGN – FLEXIBLE IN APPI\LICATION
EMAIL: [email protected]
2
PHONE: 604-465-0009
FAX: 604-465-0084