CORA CBL-DT Instrukcja instalacji i montażu - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji i montażu dla Stojaki i stojaki CORA CBL-DT. CORA CBL-DT 20 stron. Bike rack - double tier locker
Drukuj stronęLocker Installation & Assembly Instructions
Cora Bike Rack - Double Tier Locker (CBL-DT)
11.
Attach posts to base frame
• Attach the T bracket to the side
support posts using x2 phillips head
fasteners and washers on each post
(note this is bracket A - see
components list).
• Attach the post to the inside of the
base frame using x2 phillips head
fasteners and washers on each side
12.
Attach door and rear wall assembly
• Screw door assembly to base frame using two (x2 )
phillips head fasteners.
• Rest door assembly on top of base frame (at end that the door
assembly will be located)
• Door assembly is fixed to one end of base frame, by using
the two screws at bottom of panel frame, to secure panel
assembly to outside of tabs at end of base frame
Cora Bike Rack - Australia's Bike Parking Experts - WWW.CORA.COM.AU - PH 1800 249 878
• Screw rear wall assembly to base frame using
two (x2 ) phillips head fasteners.
• Rest panel assembly on top of base frame
(at end that the rear panel will be located)
• Rear panel assembly is fixed to one end of
base frame, by using the two screws at bottom
of panel frame, to secure panel assembly to
outside of tabs at end of base frame
Rev 1.00 Dec 2020
©