AGS Parksafe Control Panel Instrukcja instalacji i obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Panel sterowania AGS Parksafe Control Panel. AGS Parksafe Control Panel 16 stron. Ventilation control panel
Również dla AGS Parksafe Control Panel: Instrukcja instalacji i obsługi (16 strony), Instalacja, obsługa i konserwacja (16 strony), Instrukcja instalacji, obsługi i konserwacji (20 strony)
Drukuj stronę
Installation & Operation Manual
Settings Menu
The Parksafe panel has a touch screen which allows the engineer/user to configure the system.
Adjust the screen brightness.
(Press or slide the cursor up and down)
Menu Options Explained
FUNCTION
Auto Start
0-10V Minimum Value
Alarm Time Delay
Damper Follows
Temperature Alarm >
Factory Set Condition
Auto Start
0-10V Minimum Value
Alarm Time Delay
Damper Follows
Temperature Alarm >
AGS Parksafe Panel - IOM Iss: 6 10-20
OPTION
Explanation
- ON
In the event of a power loss - the Parksafe panel will
automatically restart when power is restored, or not.
- OFF
- 0 or 2V
0-10V terminal output under normal / safe conditions.
Time (minutes) for alarm relay to switch when detectors
- 1 to 5
reach alarm status. (Following second relay: Output 2).
- Output 1
The Damper relay output can switch together with
- Output 2
either [OUTPUT 1], [OUTPUT 2] or the [ALARM] relays.
- Alarm
- 68 to 86°
All Relays will activate when the defined temperature
(F°) is exceeded. Select Off to disable function.
- Off
- ON
Panel will restart following a power cut/loss.
- 0V
No voltage output under normal condition status.
Following Output 2 relay switching, the Alarm relay will
- 1
activate after one (1) minute.
- Output 1
Damper relay switches with [Output 1] relay.
- Off
Temperature alarm disabled.
Change/select option.
(Press the blue option box or press and hold)
Parksafe
9