AGS Parksafe Control Panel Kurulum ve Kullanım Kılavuzu - Sayfa 9
Kontrol Paneli AGS Parksafe Control Panel için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. AGS Parksafe Control Panel 16 sayfaları. Ventilation control panel
Ayrıca AGS Parksafe Control Panel için: Kurulum ve Kullanım Kılavuzu (16 sayfalar), Kurulum Operasyon ve Bakım (16 sayfalar), Kurulum, Çalıştırma ve Bakım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Installation & Operation Manual
Settings Menu
The Parksafe panel has a touch screen which allows the engineer/user to configure the system.
Adjust the screen brightness.
(Press or slide the cursor up and down)
Menu Options Explained
FUNCTION
Auto Start
0-10V Minimum Value
Alarm Time Delay
Damper Follows
Temperature Alarm >
Factory Set Condition
Auto Start
0-10V Minimum Value
Alarm Time Delay
Damper Follows
Temperature Alarm >
AGS Parksafe Panel - IOM Iss: 6 10-20
OPTION
Explanation
- ON
In the event of a power loss - the Parksafe panel will
automatically restart when power is restored, or not.
- OFF
- 0 or 2V
0-10V terminal output under normal / safe conditions.
Time (minutes) for alarm relay to switch when detectors
- 1 to 5
reach alarm status. (Following second relay: Output 2).
- Output 1
The Damper relay output can switch together with
- Output 2
either [OUTPUT 1], [OUTPUT 2] or the [ALARM] relays.
- Alarm
- 68 to 86°
All Relays will activate when the defined temperature
(F°) is exceeded. Select Off to disable function.
- Off
- ON
Panel will restart following a power cut/loss.
- 0V
No voltage output under normal condition status.
Following Output 2 relay switching, the Alarm relay will
- 1
activate after one (1) minute.
- Output 1
Damper relay switches with [Output 1] relay.
- Off
Temperature alarm disabled.
Change/select option.
(Press the blue option box or press and hold)
Parksafe
9