Century Helicopter Products Hummingbird Elite 3D Pro Instrukcja montażu i obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Zabawka Century Helicopter Products Hummingbird Elite 3D Pro. Century Helicopter Products Hummingbird Elite 3D Pro 12 stron.
Również dla Century Helicopter Products Hummingbird Elite 3D Pro: Instrukcja obsługi (10 strony)

Drukuj stronę

Century Helicopter Products Hummingbird Elite 3D Pro Instrukcja montażu i obsługi

1. Specifications

Section 1: Mast Tower Assembly

Bags Used:

CNE309, CNE310, CNE312, CNE216

Mast Tower Assembly (1-1)

1) Place the

Mast Tower

CNE309 on top of the CNE312

align until the

Mast Tower

2) Secure the

Mast Tower

with the supplied

CNE309 parts bag.

3) Identify the

Motor Mount

with CNE310 and slip it over the

The

should touch the lower tab of the

Motor Mount

the

Tail Boom Brace Bracket

Secure the

Tail Boom Brace Bracket

Machine Screws

(4X).

4) Open parts bag CNE216

Antirotation Bracket

Tower, facing forward, towards the

Place this assembly aside for now, we will return to it later.

Section 2: Lower Frame Plate Assembly

Bags Used:

CNE311, CNE320, CNE310

Lower Frame Plate Assembly (2-1)

Get parts bag CNE311

Lower Frame

remaining

Frame Holders

in parts bag CNE310.

5) Slip the

Battery Holders

on from the left side of the

6) Slip the

Radio Tray

onto the

ing Slots

and the

Rear Lower Bracket

Place this assembly aside for now, we will get back to it later.

Section 3: Tail Boom & Drive Shaft Assembly

Bags Used:

CNE316, CNE315, CNE305

Tail Boom & Drive Shaft Assembly (3-1, 3-2)

Get parts bag CNE316 Tail boom, push rod and guides, CNE315 Tail drive shaft set and CNE305 Tail drive

shaft gears.

7) Get the

Tail Drive Shaft Bearing

(Optional) around the race of the bearing, coat the rubber o-ring on the outside of the

Bearing

with a ﬁlm of liquid soap, so it can easily be pushed inside the center of the

wooden dowel

to insert the

Tail Boom #CNE316

3-1

Tail Boom & Drive Shaft Assembly (Fig. 3-2)

8) Using the mast tower assembly from step 4 insert the slotted

side of the

into the

Tail Boom

until slots on the

Tail Boom

Boom Brace

Bracket. Secure the

M3x3 Set Screws

found in the parts bag CNE310 (screw bag).

Upper Frame Plate

to match the bolt pattern of the

M2x5 Machine Screws (3X)

Mast

over the opposite end of the

and

Motor Mount

with the supplied

and place it on top of the

Motor

Mount.

Plate, CNE320

Battery Holders

Lower Frame

Lower Frame Plate

closest to the

on the opposite side.

inside CNE315 parts bag. Drop a small amount of Tri-ﬂow CN2024T

Tail Drive Shaft Bearing

in the center of the

Tail Drive Shaft Bearing

#CNE315

Bracket. Twist

Tail Boom Brace

ﬁt snugly in place inside the

Tail Boom

with the supplied

and

Upper Frame

Plate.

found in

Upper Frame

Plate.

Tower. Then install

M2x8 Machine

Upper Frame

Plate.

Screws (2)

#CNE310

M2x8

Mast

2-1

and the

Plate.

Motor Mount-

Tail

Boom.

3-2

Tail

M3x3 Set Screws

Bearing #CNE213

(Between bracket

& tower)

1-1

Mast Tower

#CNE309

Upper Frame

Plate #CNE312

Tail Boom

Bearing

Brace Bracket

#CNE213

#CNE310

Battery

Holders

#CNE320

Motor

Mounting

Slots

Radio Tray

FRONT

#CNE310

Tail Drive Shaft

Boom. Use a

Wooden dowel

Tail Boom

Brace Bracket

#CNE310

Tail Boom

(Slotted End)

(2) #CNE310

#CNE316

Swashplate

Antirotation

Bracket

#CNE216

M2x5 Machine

Screws (3)

#CNE309

M2x8 Machine

Screws (2)

#CNE310

Motor Mount

#CNE310

Flanged

Lower

Ball Bearing

Frame Plate

#CNE213F

#CNE311

Rear Lower

REAR

Bracket

#CNE310