Dell DL4300 Podręcznik wdrażania - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik wdrażania dla Serwer Dell DL4300. Dell DL4300 33 stron.
Również dla Dell DL4300: Pierwsze kroki (2 strony), Rozpoczęcie pracy z systemem (2 strony), Rozpoczęcie pracy z systemem (2 strony)

Multi-chain configuration

Multi-chain configuration supports up to four enclosures. The first two enclosures are daisy-chained with

one of the enclosures connected to a single port on the controller card. The other two enclosures are

daisy-chained with one of the enclosures connected to the second port on the controller card.

Connecting the Cable Management Arm (Optional)

If the appliance includes a Cable Management Arm (CMA), locate the CMA Installation Instructions that

shipped with the CMA kit and follow the instructions to install the CMA.

Locate the Getting Started With Your System document that shipped with your appliance. Follow the

instructions to attach the keyboard, mouse, monitor, power, and network cables to the appliance.

After cabling the appliance, turn on the MD1400 storage enclosure, and then turn on the DL4300 system.

NOTE: It is recommended that you connect the appliance to an Uninterrupted Power Supply (UPS)

for maximum reliability and availability.

The DL4300 supports nearline SAS drives only. The operating system resides on a RAID 1 (mirrored) virtual

disk located in slots 12 and 13. For information on these disks, see the Dell DL4300 Appliance Owner's

Manual at dell.com/support/home. Drives available in slots 0–11 and 14–17 are available for automatic

configuration by the AppAssure Appliance Configuration Wizard (recommended) but can be manually