Dell DL4300 배포 매뉴얼 - 페이지 9

{카테고리_이름} Dell DL4300에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell DL4300 33 페이지.
Dell DL4300에 대해서도 마찬가지입니다: 시작하기 (2 페이지), 시스템 시작하기 (2 페이지), 시스템 시작하기 (2 페이지)

페이지 인쇄

Multi-chain configuration

Multi-chain configuration supports up to four enclosures. The first two enclosures are daisy-chained with

one of the enclosures connected to a single port on the controller card. The other two enclosures are

daisy-chained with one of the enclosures connected to the second port on the controller card.

Connecting the Cable Management Arm (Optional)

If the appliance includes a Cable Management Arm (CMA), locate the CMA Installation Instructions that

shipped with the CMA kit and follow the instructions to install the CMA.

Cabling the appliance

Locate the Getting Started With Your System document that shipped with your appliance. Follow the

instructions to attach the keyboard, mouse, monitor, power, and network cables to the appliance.

Turning on the appliance

After cabling the appliance, turn on the MD1400 storage enclosure, and then turn on the DL4300 system.

NOTE: It is recommended that you connect the appliance to an Uninterrupted Power Supply (UPS)

for maximum reliability and availability.

DL4300 disk configurations

The DL4300 supports nearline SAS drives only. The operating system resides on a RAID 1 (mirrored) virtual

disk located in slots 12 and 13. For information on these disks, see the Dell DL4300 Appliance Owner's

Manual at dell.com/support/home. Drives available in slots 0–11 and 14–17 are available for automatic

configuration by the AppAssure Appliance Configuration Wizard (recommended) but can be manually