Dell DL4300 Посібник з розгортання - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з розгортання для Сервер Dell DL4300. Dell DL4300 33 сторінки.
Також для Dell DL4300: Початок роботи (2 сторінок), Початок роботи з системою (2 сторінок), Початок роботи з системою (2 сторінок)

Dell DL4300 Посібник з розгортання
Multi-chain configuration
Multi-chain configuration supports up to four enclosures. The first two enclosures are daisy-chained with
one of the enclosures connected to a single port on the controller card. The other two enclosures are
daisy-chained with one of the enclosures connected to the second port on the controller card.

Connecting the Cable Management Arm (Optional)

If the appliance includes a Cable Management Arm (CMA), locate the CMA Installation Instructions that
shipped with the CMA kit and follow the instructions to install the CMA.

Cabling the appliance

Locate the Getting Started With Your System document that shipped with your appliance. Follow the
instructions to attach the keyboard, mouse, monitor, power, and network cables to the appliance.

Turning on the appliance

After cabling the appliance, turn on the MD1400 storage enclosure, and then turn on the DL4300 system.
NOTE: It is recommended that you connect the appliance to an Uninterrupted Power Supply (UPS)
for maximum reliability and availability.

DL4300 disk configurations

The DL4300 supports nearline SAS drives only. The operating system resides on a RAID 1 (mirrored) virtual
disk located in slots 12 and 13. For information on these disks, see the Dell DL4300 Appliance Owner's
Manual at dell.com/support/home. Drives available in slots 0–11 and 14–17 are available for automatic
configuration by the AppAssure Appliance Configuration Wizard (recommended) but can be manually
9