AquaPRO 03AP548 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody AquaPRO 03AP548. AquaPRO 03AP548 16 stron. Pressure filter/uv clarifier

Drukuj stronę

REPLACING THE UV GLOBE

Replacement UV Globes can be purchased from your local stockist or ordered from Aquatec Equipment.

• Turn off power supply to the filter and remove plug

from power outlet. Turn off your water pump.

• Undo the 4 screws on the top of the filter holding the

UV-C Assembly in place.

• Carefully lift up the UV•C Assembly out of the filter lid.

Take care not to impact the quartz sleeve on anything

- it will break.

• Undo the quartz sleeve locking nut at the top of the

quartz sleeve. Take care not to lose the quartz sleeve O'

ring and collar.

• Carefully remove the quartz sleeve from the UV•C.

assembly. Clean the Quartz sleeve to remove any algae

or lime scale build-up. Place in a secure position.

• You can now access the globe to replace it. Pull out the

old globe and discard responsibly. Insert a new globe

ensuring it is connected securely.

• Replace the quartz sleeve onto the UV•C assembly

ensuring the O-rings and collar is located properly.

Replace and tighten the quartz sleeve locking nut.

• Replace the UV-C assembly into the top of the filter

ensuring it fits securely. Tighten the 4 screws fixing the

assembly into the filler lid.

• Turn your water pump back on, and then reconnect

power supply, and turn on your filter. You have

successfully replaced your UV-C globe .

AQP AP2100UV Instructions.indd 7

AP2100UV / AP5000UV / AP10000UV

PRESSURE FILTER / UV CLARIFIERS

A Q U A T E C E Q U I P M E N T . C O M

27/10/16 7:53 am