Aquasana OptimH2O AQ-RO-3 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody Aquasana OptimH2O AQ-RO-3. Aquasana OptimH2O AQ-RO-3 16 stron. Whole house water filter
Również dla Aquasana OptimH2O AQ-RO-3: Instrukcja obsługi (14 strony), Instrukcja obsługi (11 strony), Instrukcja obsługi (10 strony)
Drukuj stronę
8
INSTALLATION STEPS
9
Reattach Top Cap
1. Reposition the top cap into
its original location.
Final System Check
10
1. Once installation is complete, allow proper time for glue to dry
according to manufacturer instructions.
2. Push down on the red
depressurization button on the top
cap to relieve the system of air.
Keep the button pushed down as
you slowly turn the water back on.
DO NOT release the button until
all air pressure is fully released
and water comes out of the red
depressurization button.
3. Release the red button and inspect the system for leaks. After
inspecting for leaks, allow water to run through the system for 10
minutes for the final flushing period.
2. Reattach top tank snap ring. Pull up
on the top cap to seat the O-rings.