Aquasana OptimH2O AQ-RO-3 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Aquasana OptimH2O AQ-RO-3에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquasana OptimH2O AQ-RO-3 16 페이지. Whole house water filter
Aquasana OptimH2O AQ-RO-3에 대해서도 마찬가지입니다: 소유자 매뉴얼 (14 페이지), 소유자 매뉴얼 (11 페이지), 소유자 매뉴얼 (10 페이지)

페이지 인쇄

INSTALLATION STEPS

Reattach Top Cap

1. Reposition the top cap into

its original location.

Final System Check

1. Once installation is complete, allow proper time for glue to dry

according to manufacturer instructions.

2. Push down on the red

depressurization button on the top

cap to relieve the system of air.

Keep the button pushed down as

you slowly turn the water back on.

DO NOT release the button until

all air pressure is fully released

and water comes out of the red

depressurization button.

3. Release the red button and inspect the system for leaks. After

inspecting for leaks, allow water to run through the system for 10

minutes for the final flushing period.

2. Reattach top tank snap ring. Pull up

on the top cap to seat the O-rings.